OFFICIAL SITE OF THE STATE OF NEW JERSEY

[vc_row][vc_column][vc_empty_space][breadcrumb-shortcode][/vc_column][/vc_row][vc_row full_width=”stretch_row_content_no_spaces”][vc_column][vc_column_text css=”” el_class=”mt-3″]

Technical Manuals and Methods

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text css=”” el_class=”p-4 bg-white rounded”]

TECHNICAL MANUALS

Technical Manual 1004
Guidelines for Compliance Stack Emission Test Programs

• Instructions for Using the Facility Submittal Service (FSS)
• Protocol Preparation Tool (MS Excel)
• Emission Test Production Report Form
• THC Worst-Case Outlet Allowable (WCOA) Calculation Tool (MS Excel)

Technical Manual 1005 – UPDATED
The Department has published a public notice for the proposed revisions of the existing Technical Manual 1005 (TM 1005). The revised TM 1005 introduces several substantive updates, including expanded definitions, updated method references and performance specifications. For details of proposed changes and the information about submitting comments, please refer to the links below.

• Technical Manual 1005 Public Notice
• Technical Manual 1005 Revised Draft
• Fact Sheet Technical Manual 1005

Technical Manual 1005 – EXISTING
Guidelines for Continuous Emissions Monitoring Systems (CEMS), Continuous Opacity Monitoring Systems (COMS), Periodic Monitoring Procedures (PMPs) and Annual Combustion Adjustments (ACAs)

• • Instructions for Using the Facility Submittal Service (FSS)
  • CEMS Multi Hour Averages
  • 3-Hour Rolling Average Based on 1-Hour Blocks (PDF)

[/vc_column_text][vc_column_text css=”” el_class=”p-4 bg-white rounded”]

NEW JERSEY TEST METHODS

• Air Test Method 1 – Sampling and Analytical Procedures for Determining Emissions of Particles from Manufacturing Processes and from Combustion of Fuels
• Air Test Method 2 – Procedures for the Visual Determination of the Opacity (Percent) and Shade or Appearance (Ringelmann Number) of Emissions from Sources
• Plume Observation Recording Form
• Guidance for Performing Opacity Observations using NJATM2 when a 10-Consecutive Second Standard Applies
  
• Guidance for Verifying No Visible Emissions by a Non-Certified Observer for a 10-Consecutive Second Standard
  
• Air Test Method 3 – Sampling and Analytical Procedures for the Determination of Volatile Organic Compounds from Source Operations
  
• Air Test Method 5 – Sampling and Analytical Procedures for Determining Emissions of Particles from Combustion of Wastes

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text css=”” el_class=”p-4 bg-white rounded”]

METHOD TEMPLATES

• • Method 1 – Sample and Velocity Traverses for Stationary Sources
  • Method 2 – Determination of Stack Gas Velocity and Volumetric Flow Rate (Type S Pitot Tube)
  • Method 3 – Gas Analysis for the Determination of Dry Molecular Weight
  • Method 3A – Determination of Carbon Dioxide and Oxygen from Stationary Sources
  • Method 4 – Determination of Moisture Content in Stack Gases
  • Method 6 – Determination of Sulfur Dioxide Emissions From Stationary Sources
  • Method 6C – Determination of Sulfur Dioxide Emissions from Stationary Sources
  • Method 7E – Determination of Nitrogen Oxide Emissions from Stationary Sources
  • Method 8 – Determination of Sulfuric Acid Mist and Sulfur Dioxide Emissions from Stationary Sources
  • Method 8 – Correction for Special Situation Section No. 1
  • Method 10 – Determination of Carbon Monoxide Emissions from Stationary Sources
  • Method 25A – Determination of Total Gaseous Organic Concentration using a Flame Ionization Analyzer
  • Method 25B – Determination of Total Gaseous Organic Concentration using a Nondispersive Infrared Analyzer
  • Method 26 – Determination of Hydrogen Halides and Halogens Emissions from Stationary Sources NON-Isokinetic Method
  • Method 26A – Determination of Hydrogen Halides and Halogens Emissions from Stationary Sources Isokinetic Method
  • Method 29 – Determination of Metals Emissions from Stationary Sources
  • NJ Air Test Method 1 – Determination of Particulate Matter from Stationary Sources
  • Conditional Test Method 027 – Determination of Ammonia Emissions in Stationary Sources

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_btn title=”Contact Us” color=”primary” size=”lg” i_icon_fontawesome=”fa fa-solid fa-tty” css=”” add_icon=”true” link=”url:https%3A%2F%2Fdeptest.nj.gov%2Fdae%2Fem-contact-information%2F|title:EMS%20%E2%80%93%20Contact%20Information”][/vc_column][vc_column width=”3/4″][/vc_column][/vc_row]